3M MEDICAL IMAGING -- "SCOTCHGARD" BRAND FABRIC PROTECTOR  -- 8030-00-116-9255
<pre>=====================  Product Identification  =====================

Product ID:"SCOTCHGARD" BRAND FABRIC PROTECTOR
MSDS Date:01/01/1987
FSC:8030
NIIN:00-116-9255
=== Responsible Party ===
Company Name:3M MEDICAL IMAGING
Address:3M CENTER BLDG 223-25W
City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:(612) 733-1110
CAGE:76381
=== Contractor Identification ===
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
Company Name:MINNESOTA MINING AND MFG CO CONSUMER SPECIALTIES
    ENCAPSULATE
Address:3M CTR
Box:City:ST PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:612-737-4114
CAGE:28213

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 95.5%
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Fraction by Wt: 4.0%
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

Ingred Name:FLUORO ALIPHATIC RESIN SOLUTION
Fraction by Wt: 1.1%

Ingred Name:METHYL ISOBUTYL KETONE  (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 0.4%
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113)  (SARA
    III)
CAS:76-13-1
RTECS #:KJ4000000
Fraction by Wt: 0.4%
OSHA PEL:1000PPM/1250STEL
ACGIH TLV:1000PPM/1250STEL9192
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN CONT: IRRITATING/SENSITIZING. INHALATION:
    OVEREXPOSURE TO VAPOR/SPRAY PARTS MAY BE HARM/FATAL

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH WITH WATER. IF IRRITATION PERSISTS, CALL A
    PHYSICIAN. SKIN CONTACT: WASH WITH SOAP AND WATER. INHALATION:
    PROVIDE FRESH AIR. CALL A PHYSICIAN IF BREATHING IS DIFFICULT.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:6.3%
Upper Limits:15.5
Extinguishing Media:WATER, CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:TREAT AS A PRESSURIZED CONTAINER.
Unusual Fire/Explosion Hazard:EXCESSIVE HEAT WILL CAUSE THE AEROSOL
    CANS TO EXPLODE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DO NOT PUNCTURE CANS OR BURN IN A HOUSEHOLD
    INCINERATOR. BURN IN A HEAVY-DUTY INCINETOR THAT CAN HANDLE AEROSOL
    CANS WITHOUT DAMAGE. COMBUSTION PRODUCTS MAYONTAIN HYDROCHLORIC
    ACID (HCL) AND HYDROFLUO RIC ACID (HF).

======================	Handling and Storage  ======================

Handling and Storage Precautions:VAPOR/AIRBORNE MIST MAY BE HARMFUL.
    AVOID BREATHING VAPORS. PRODUCT USE WITHOUT VENTILATION IN CLOSED
    AREA MAY ALSO BE HARMFUL/FATAL.
Other Precautions:USE ONLY IN AREAS ADEQUATELY VENTILATED TO REMOVE
    VAPORS AND PREVENT VAPOR BUILD-UP. KEEP OUT OF REACH OF CHILDREN.
    DO NOT PCTURE, INCINERATED, OR STORE >120F(49C).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:N/K					      
    _
Ventilation:DON'T USE WITHOUT LOCAL VENTILATION
Other Protective Equipment:USE OUTDOORS IF POSSIBLE
Supplemental Safety and Health
MSDS DATE: 16 JAN 86. ALSO CONTAINS: STODDARD SOLVENT (PETROLEUM
    DISTILLATE) (WJ8925000) 0.1%

==================  Physical/Chemical Properties  ==================

HCC:V2
Boiling Pt:B.P. Text:175F
Vapor Pres:100
Vapor Density:4.55
Spec Gravity:1.3
Evaporation Rate &amp; Reference:(BU ETHER=1): 0.4
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQUID, CHLORINATED SOLVENT ODOR
Percent Volatiles by Volume:99.5

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:TEMPS >600F MAY PRODUCES TOXIC
    CHLORINATED BY-PRODUCTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOR SINGLE CAN DISPOSAL, BLEED CAN OF PROPELLANT
    IN A WELL VENTILATED AREA. EMPTY CAN MAY BE BURIED IN A SANITARY
    LANDFILL IN ACCORDANCE WITH LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.